Vision SP-900P Active speakers

• 2-Way

  A 5.25″ woofer is complemented by a Mylar dome tweeter. The dome tweeter offers a wide dispersion so everyone in the room can hear at the same volume. This means loud and clear sound for meeting rooms and classrooms.

• Volume Control

  The volume dial is on the rear of the ‘master’ loudspeaker – the one containing the amplifier. It is alongside the hard power switch.

• Wall Brackets

  The brackets allow installers to easily tilt side to side, and the use of a dome tweeter means the speakers can be mounted on their sides allowing downward tilt. Alternately, leave the brackets off and use as shelf speakers.

• Multiple Inputs

  The rear panel of the master loudspeaker offers minijack and 2-phono (RCA) inputs.

• PP Chassis

  Heavy-weight plastic material is used for the chassis, allowing a rigid acoustic chamber for distortion-free sound.

• Bass Reflex

  A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.

• Inputs Summed

  The inputs are combined at input stage meaning there is no input selection switch. Note: when both inputs are connected all source and display devices in the system should be powered from the same mains power source, otherwise earth hums will occur.

Specifications

• PRODUCT DIMENSIONS

  245 x 183 x 164 mm (tall x wide x deep for each speaker)

• PACKAGED DIMENSIONS

  395 x 235 x 275 mm

• PRODUCT WEIGHT

  Master: 2.7 kg
  Slave: 2.5 kg

• PACKAGED WEIGHT

  5.5 kg

• CONSTRUCTION MATERIAL

  PP

• COLOUR

  White

• WOOFER

  5.25″ Paper

• TWEETER

  0.5" Mylar Dome

• INPUTS

  Minijack (3.5mm)
  2-Phono (RCA)
  (Summed)

• SPEAKER OUTPUT

  Removable Phoenix type

• SPEAKER INPUT (ON SLAVE)

  Bare Wire Screw type

• LOW IMPEDANCE DYNAMIC POWER

  2 x 27 watt at 8 ohms

• LOW IMPEDANCE RMS POWER

  2 x 15 watt at 8 ohms

• SENSITIVITY

  101 dB (1w/1m)

• FREQUENCY RESPONSE

  50Hz-20kHz

• TOTAL HARMONIC DISTORTION (THD)

  1%

• ACCESSORIES INCLUDED

  2 x Wall brackets
  1 x Speaker Cable 5m
  1 x Euro Figure-8 Power cable 1.8 m long
  1 x UK Figure-8 Power cable 1.8 m long
  1 x AU Figure-8 Power cable 1.8 m long
  1 x US Figure-8 Power cable 1.8 m long
  Note: no input cables included

• POWER SUPPLY

  100-240v 50/60Hz AC Internal Power Supply

• WARRANTY

  Lifetime return-to-base