Vision TC3 Wall amplifier with pair of ceiling speakers

• Silk Dome

  The large tweeter is made from premium material and pivots to help installers setup the soundscape. Silk ensures long, stable performance and reduces distortion.

• Woven fiberglass

  Woven fiberglass gives smooth audio with incredible detail and transparency. The cone is held in place with a butyl rubber surround to extend the life of the loudspeaker.

• Magnetic Grill

  The grill clips into place magnetically once the speakers are secured.

• Invisible

  The grill extends all the way to the edge of the speaker resulting in virtually no visible edge. This ultra thin grille allows the technology to visually disappear.

• Simple to fit

  A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 205 mm hole and turn the dog-leg screws from below to fix the speaker; it’s quick and easy.

• Shallow

  Only 95 mm deep, the CS-1900 can be placed anywhere around the room to optimally disperse the sound. They fit in any environment which has a false ceiling.

• Crossover

  Gold plated terminals and a quality crossover circuit is included which splits the work between the woofer and tweeter.

• High Sensitivity

  Ceiling speakers often lack the power of wall speakers, but these have a higher sensitivity of 87dB to cut through high-noise presentation environments.

• Thick Ceiling?

  The clamps are an extra long 26 mm to cope with ceilings made of very thick material. Most ceiling speakers can only cope with tiles up to 15 mm thick.

CS-1900 Specifications

• LOUDSPEAKER DIMENSIONS

  225 x 95 mm

• CUTOUT SIZE

  205 mm

• CARTON DIMENSIONS

  280 x 245 x 280 mm (contains a pair)

• SPEAKER WEIGHT

  1.4 kg (each)

• CARTON WEIGHT

  3 kg (contains a pair)

• POWER HANDLING

  60 Watt RMS

• WOOFER

  6.5″ Woven fiberglass

• TWEETER

  0.75″ Silk Dome

• CONTRUCTION MATERIAL

  ABS Plastic

• SPEAKER TERMINALS

  Spring post

• NOMINAL IMPEDANCE

  8 ohms

• SENSITIVITY

  87 dB (1w/1m)

• FREQUENCY RESPONSE

  60Hz-20kHz

• COLOUR

  Cone: Yellow
  Basket: Black
  Grill: White

• Front Panel Input

  Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.

• D-Class Amplifier

  Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary

• Power Four Speakers

  Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

• Preset Memory

  By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.

• Tactile Dial

  A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.

• Remote Control

  A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.

• Easy to Install and Uninstall

  A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.

• Cables Included

  Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

• Secure

  Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.

• Close at Hand

  Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.

• Integrated Techconnect Family

  Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

TC3-AMP Specifications

• AMPLIFIER MODULE DIMENSIONS

  42 x 64 x 36mm

• BACKBOX DIMENSIONS

  86 x 86 x 45mm

• SURROUND DIMENSIONS

  86 x 86 x 8mm

• CARTON DIMENSIONS

  240 x 205 x 63mm

• AMPLIFIER WEIGHT

  63 grams

• PACKAGED WEIGHT

  1.1kg

• COLOUR

  White

• INPUTS

  2 x Stereo inputs via removable phoenix connectors

• 2 X 25W @ 8 OHMS

• TOTAL HARMONIC DISTORTION

  less than or equal to 1% (20Hz~22kHz)

• FREQUENCY RESPONSE (LINE IN)

  80Hz~22kHz(±2dB)

• SIGNAL TO NOISE RATIO (LINE IN)

  more than or equal to 98dB (A-weighted)

• RATING INPUT LEVEL/IMPEDANCE

  Line in 500mV/50k Ω

• POWER CONSUMPTION (RATING CONDITION)

  less than or equal to 50W

• ACCESSORIES INCLUDED

  1 x Single-gang Backbox
  1 x Single-gang Surround
  2 x 150mm input cables
  2 x Unshielded Speaker cable 5m long
  1 x Remote Control with batteries

• POWER SUPPLY

  100-240v 50/60Hz AC External Power Supply – 15 volt / 4 amp.

• LAPTOP-STYLE TRANSFORMER

• INCLUDES 4 X 0.5M (4 X 1.6 FT) FIGURE-8 POWER CABLES

  UK/EU/US/AU

• DC TAIL LENGTH

  4m

• TRANSFORMER DIMENSIONS

  108 x 50 x 33mm