Vision Input Faceplate Builder - 2 slots

The Vision Techconnect TC3 faceplate is a modular audio-visual faceplate designed to be easy to configure, install and maintain with screw in interchangeable modules and no solder connections.

This builder allows you to easily configure your faceplate with the inputs you need from the options below.

The kit you will receive includes a 1-gang backbox, a 1-gang surround and your choice of 2x modules to populate the available slots. Cables are sold separately.

Modules available:

- Blank module: Use if you require only 1 input and need to close up one of the slots.

- HDMI module: HDMI socket at the front, pigtail with HDMI socket at the back to connect to a HDMI cable (sold separately)

- HDMI Active Booster module: HDMI socket at the front, pigtail with HDMI socket at the back to connect to a HDMI cable (sold separately) - Incorporates an active booster to achieve 4K @ 60Hz resolution with cables up to 15m

- VGA module: VGA (15-pin D-Sub) socket at the front, phoenix connector at the back to connect to a Vision VGA to Phoenix cable (sold separately)

- VGA + 3.5mm minijack audio module: VGA (15-pin D-Sub) and 3.5mm minijack sockets at the front, phoenix connectors at the back to connect to Vision VGA to Phoenix and 3.5mm to Phoenix cables (sold separately)

- 3.5mm minijack audio module: 3.5mm minijack socket at the front, phoenix connector at the back to connect to Vision 3.5mm to Phoenix cable (sold separately)

- USB-A module: USB-A socket at the front, USB-B socket at the back (USB 3.0)

- USB-B module: USB-B socket at the front, pigtail with USB-A socket at the back (USB 3.0)

- USB-B Active Booster module : USB-B socket at the front, USB-A socket at the back - Incorporates an active booster for use with longer USB cables

- USB-C module: USB-C socket at the front, pigtail with HDMI + USB-A 2.0 sockets at the back - Incorporates and active booster for use with cables up to 15m - Cannot charge USB-C connected devices