Vision SP-1900P Active speakers

• Serial Control

  RS-232 control allows this audio system to be controlled by a control system like Vision’s own Techconnect Control. Tone and volume can be adjusted or inputs selected via RS-232.Note: this product does not have a remote control. 

• Auto Standby

  Auto-standby is on by default. It can be disabled via RS-232.

• Bass Reflex

  A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.

• 5.25″ Woofer

  These loudspeakers use a 5.25 inch woofer – the most popular size for classroom, meeting room, and boardroom applications. They are complemented with a 0.5" inch Mylar dome tweeter.

• Horizontal C bracket

  The adjustable brackets allow the installer to easily angle side to side, or up and down. Or leave the brackets off and use as shelf speakers.

• Rugged Grille

  Attractive and robust, the thick metal grille protects the drivers from physical interference.

• Memory

  When power is connected the SP-1900P automatically comes on and remembers the previous volume setting. Restoring power brings the loudspeakers back to life automatically.

• Stereo Input

  The 2-Phono (RCA) input makes it quick and easy to get up and running.

• Bluetooth

  Connect from your phone or tablet without missing a beat. By default the speakers auto-switch from the line-level input when Bluetooth is paired.

  • A button on the rear turns BT off if you don't need it
  • The PIN and Bluetooth name cannot be changed
  The speakers have only one Bluetooth memory slot and will automatically connect to the most recent device. To unpair an unwanted device manually wait until that device is out of range then pair a new device. They can only pair to one device at a time.

Specifications

• PRODUCT DIMENSIONS

  245 x 183 x 164 (tall x deep x wide for each cabinet)

• PACKAGED DIMENSIONS

  395 x 235 x 275 mm

• PRODUCT WEIGHT

  Master: 2.7 kg
  Slave: 2.5 kg

• PACKAGED WEIGHT

  5.5 kg

• CONSTRUCTION MATERIAL

  PP

• COLOUR

  White

• AMPLIFIER OUTPUT

  Low Impedance Dynamic Power: 2 x 30 watt at 8 ohms
  Low Impedance RMS Power: 2 x 15 watt at 8 ohm

• LOUDSPEAKER SYSTEM

  2-way

• WOOFER

  5.25″ Polypropylene Cone

• TWEETER

  0.5" Mylar Dome

• MOUNTING SYSTEM

  C-bracket

• INPUTS

  Stereo 2-Phono (RCA)
  Bluetooth

• SPEAKER OUTPUT

  Removable Phoenix type

• BLUETOOTH VERSION

  5.0

• BLUETOOTH RANGE

  10 m

• NOMINAL IMPEDANCE

  8 ohms

• SENSITIVITY

  86 dB (1w/1m)

• FREQUENCY RESPONSE

  45 Hz-20 kHz

• POWER SUPPLY

  100-240v 50/60Hz AC Internal Power Supply

• CONTROL INTERFACE

  RS-232 Serial

• TOTAL HARMONIC DISTORTION (THD)

  1%

• ACCESSORIES INCLUDED

  2 x Wall brackets
  1 x Speaker Cable 5m
  1 x Euro Figure-8 Power cable 1.8 m long
  1 x UK Figure-8 Power cable 1.8 m long
  1 x AU Figure-8 Power cable 1.8 m long
  1 x US Figure-8 Power cable 1.8 m long
  Note: no input cables included

• WARRANTY

  Lifetime return-to-base