Vision TC3-AMP Wall Amplifier

Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.

Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary

Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.

A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.

A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.

A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.

Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.

Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.

Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

Specifications

• AMPLIFIER MODULE DIMENSIONS
  42 x 64 x 36mm / 1.65″ x 2.8″ x 1.57″

• BACKBOX DIMENSIONS
  86 x 86 x 45mm / 3.39″ x 3.39″ x 1.77″

• SURROUND DIMENSIONS
  86 x 86 x 8mm / 3.39″ x 3.39″ x 0.31″

• CARTON DIMENSIONS
  240 x 205 x 63mm / 9.45″ x 8.07″ x 2.48″

• AMPLIFIER WEIGHT
  63 grams / 0.14 lb

• PACKAGED WEIGHT
  1.1kg / 2.4 lb

• COLOUR
  White

• INPUTS
  2 x Stereo inputs via removable phoenix connectors

• 2 X 25W @ 8 OHMS

• TOTAL HARMONIC DISTORTION
  less than or equal to 1% (20Hz~22kHz)

• FREQUENCY RESPONSE (LINE IN)
  80Hz~22kHz(±2dB)

• SIGNAL TO NOISE RATIO (LINE IN)
  more than or equal to 98dB (A-weighted)

• RATING INPUT LEVEL/IMPEDANCE
  Line in 500mV/50k Ω

• POWER CONSUMPTION (RATING CONDITION)
  less than or equal to 50W

• ACCESSORIES INCLUDED
  - 1 x Single-gang Backbox
  - 1 x Single-gang Surround
  - 2 x 150mm (5.9″) input cables
  - 2 x Unshielded Speaker cable 5m (16.4 ft) long
  - 1 x Remote Control with batteries

• POWER SUPPLY
  100-240v 50/60Hz AC External Power Supply – 15 volt / 4 amp.

• LAPTOP-STYLE TRANSFORMER

• INCLUDES 4 X 0.5M (4 X 1.6 FT) FIGURE-8 POWER CABLES
  UK/EU/US/AU

• DC TAIL LENGTH
  4m (13.1 ft)

• TRANSFORMER DIMENSIONS
  108 x 50 x 33mm / 4.1″ x 2″ x 1.3″

• COMPLIANCES
  RoHS, WEEE, CE/EMC, C-TICK, FCC, IC