Vision TC3 Wall amplifier with pair of speakers

Package including a Vision TC3 50W wall amplifier and a pair of Vision SP-1800 speakers.

• Front Panel Input

  Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.

• D-Class Amplifier

  Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary

• Power Four Speakers

  Don’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

• Preset Memory

  By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.

• Tactile Dial

  A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.

• Remote Control

  A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.

• Easy to Install and Uninstall

  A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.

• Cables Included

  Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

• Secure

  Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.

• Close at Hand

  Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.

• Integrated Techconnect Family

  Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

TC3-AMP Specifications

• AMPLIFIER MODULE DIMENSIONS

  42 x 64 x 36mm

• BACKBOX DIMENSIONS

  86 x 86 x 45mm

• SURROUND DIMENSIONS

  86 x 86 x 8mm

• CARTON DIMENSIONS

  240 x 205 x 63mm

• AMPLIFIER WEIGHT

  63 grams

• PACKAGED WEIGHT

  1.1kg

• COLOUR

  White

• INPUTS

  2 x Stereo inputs via removable phoenix connectors

• 2 X 25W @ 8 OHMS

• TOTAL HARMONIC DISTORTION

  less than or equal to 1% (20Hz~22kHz)

• FREQUENCY RESPONSE (LINE IN)

  80Hz~22kHz(±2dB)

• SIGNAL TO NOISE RATIO (LINE IN)

  more than or equal to 98dB (A-weighted)

• RATING INPUT LEVEL/IMPEDANCE

  Line in 500mV/50k Ω

• POWER CONSUMPTION (RATING CONDITION)

  less than or equal to 50W

• ACCESSORIES INCLUDED

  1 x Single-gang Backbox
  1 x Single-gang Surround
  2 x 150mm input cables
  2 x Unshielded Speaker cable 5m long
  1 x Remote Control with batteries

• POWER SUPPLY

  100-240v 50/60Hz AC External Power Supply – 15 volt / 4 amp.

• LAPTOP-STYLE TRANSFORMER

• INCLUDES 4 X 0.5M (4 X 1.6 FT) FIGURE-8 POWER CABLES

  UK/EU/US/AU

• DC TAIL LENGTH

  4m

• TRANSFORMER DIMENSIONS

  108 x 50 x 33mm

• Three-Way

  These loudspeakers use three drivers; a woofer, a squawker, and a tweeter. Asking a driver to produce a wide range of frequencies is always a compromise, so dividing the sonic range into three means each driver has a narrower range of frequencies to produce, resulting in less distortion and clearer sound.

• Bass Reflex

  A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.

• Rugged Grille

  A metal grille protects the drivers from physical interference.

• Tough Finish

  Constructed with tough ABS plastic, the finish withstands the rigors of the professional use.

• Pro AV Applications

  In small to medium presentation environments a wide dispersion is generally more important than microphone feedback management, so no horns are used.

• Horizontal C bracket

  The adjustable brackets allow the installer to easily angle up 30º or down 30º. Or leave the brackets off and use as shelf speakers.

   

SP-1800 Specifications

• PRODUCT DIMENSIONS

  244 x 180 x 174 mm (tall x wide x deep for each speaker)

• PACKAGED DIMENSIONS

  465 x 205 x 270 mm

• PRODUCT WEIGHT

  4.2 kg (per pair)

• PACKAGED WEIGHT

  4.67 kg (per pair)

• CONSTRUCTION MATERIAL

  ABS

• COLOUR

  White

• POWER HANDLING

  50 watts (RMS)

• WOOFER

  5.25″

• SQUAWKER

  1″

• TWEETER

  0.5″

• INPUT TERMINALS

  Binding post

• OUTPUT IMPEDANCE

  8 ohms

• SENSITIVITY

  89dB (1w/1m)

• FREQUENCY RESPONSE

  80Hz-20kHz

• ACCESSORIES INCLUDED

  2 x Wall brackets