Barco ClickShare HDMI in to USB-C Convertor kit

Barco ClickShare HDMI in to USB-C Convertor kit for ClickShare CX-50 2nd generation.

The CX-50 (Gen 2) Base Unit's front USB Type-C port used in combination with the HDMI-in to USB-C convertor, can be used as HDMI input.
This port supports the Wired RoomDock functionality where the camera will be displayed on the PC screen.

To connect HDMI sources to the Base Unit this converter kit must be used.
It enables the connection of an HDMI source to the Base Unit and a USB Type-C port remains available.

The USB-C port on the adapter is not DP compatible so the device will not act as a switcher between HDMI and DP over USB-C.

To use the converter kit as a HDMI input, you need to enable DisplayPort over USB-C in the Base Unit Configurator ( Display & Audio > Inputs )

With Wired RoomDock, the user can share high resolution and frame rate content and connect to the room audio and video over a wired connection.
To use the converter kit for Wired Room Dock, you need to enable Wired RoomDock  in the Base Unit Configurator ( Display & Audio > Inputs )

Wired RoomDock using the HDMI™ IN to USB-C convertor kit (R9861581) is supported from firmware version 2.15 onwards.