Sapphire Room Control System

Sapphire Control Pro Range - we program so you don't have to!

This is not just any control system, this one comes supplied as a "Plug and Play" system: if  you order a Sapphire projection screen or projector lift, simply tell us which projector you are going to use and we will program the controller and send out everything you need already programmed.

Specifications

• 2x RS232 port
• 1x IR emitter
• 2x close contact

Benefits

Powered from a breakout box which can be hidden in the ceiling so there is no unsightly plug, fewer power cables in dado trunking and less chance of other users turning the power off by mistake. Power to the panel is via the supplied 10m Cat5 cable.

• If you confirm which projector you are using with the controller, we will program the RS232 commands for you and supply a 2m cable from the breakout box to a serial female connector to connect to your projector (please ensure your projector features this connection).
• Depending on the screen you have chosen, we will supply either a RJ12 to RJ12 lead to plug into the screen or an RJ12 plug to connect to the break out box and marked bare ends to push into the orange and grey connectors in our control boxes.
• If you use a Sapphire projector lift, we will supply a standard 5m - RJ45 patch lead that you simply plug in. The system is intelligent in that it will not retract the projector lift until after the projector has completed it's cooling cycle.
• Plug in power up and press the button all your devices will work together.

Programming yourself

You may download the software free of charge from the Sapphire website. It is easy to use and program any RS232 codes you wish.

If you want to use the closed contact option with any other brand of screen, we can supply a cable with the common, drop and retract marked for easy connection. If your screen uses four core wire, you can buy a Sapphire RFR kit to replace the control box on your screen to enable compatibility with the Sapphire controller.

The product is UK manufactured and comes with a 3 year warranty.

PLEASE NOTE DUE TO THE SONY PROTOCOL BEING VERY UNDEFINE WE ARE UNABLE TO PROGRAM THE CONTROLLER FOR USE WITH SONY PROJECTORS